SN 500 SA is a universal centre lathe intended for piece and small-lot production; however it is also ideal for maintenance & repair workshops. Main motor output is 7.5 kW and spindle bore is up to 105 mm. This lathe has also a wide range of operating speeds from 12.5 up to 2000 rpm.
Working range
Swing over bed 505 mm
Swing over cross slide 270 mm
Swing of the bed gap 700 mm
Useful length of the bed gap 230 mm
Distance between centres 1000, 1500, 2000 mm
Height of centres over bed 250 mm
Spindle Speed range 12,5 - 2000 min-1
Spindle front nose STN ISO 702/III - B8
Bore 77 mm Internal taper metric 90
Cross slide working travel 300 mm
Tool slide working travel 140 mm
Max. tool size 32 x 25 mm
Traverse feed number 38
Working range of longitudinal feeds 0,05 - 6,4 mm.rev-1
Working range of cross feeds 0,025 - 3,2 mm.rev-1
Longitudinal rapid traverse 3000 mm.min-1
Cross rapid traverse 1500 mm.min-1
Tailstock sleeve diameter 80 mm
Tailstock sleeve stroke 180 mm
Tailstock MORSE 5
Cross resetting ±12 mm T
hreads Metric threads - number 29 - range 0,5 - 40 mm
Whitworth threads - number 38 - range 1 - 80 thread/1"
Modular threads - number 26 - range 0,25 - 20 mm
Thread Diametral Pitch - number 31 - number of DP thread 2 - 72
Motor output: - main drive 7,5 kW -
coolant pump 0,09 kW -
rapid traverse 0,55 kW
Dimensions Width x Height 1100x1525 mm
Length for DBC 1000, 1500, 2000 2595, 3095, 3595 mm Weight Length for DBC 1000, 1500, 2000 1795, 1895, 2010 kg P.O.A |
;)